So you got a new skateboard deck? Cool, whatcha get...? Great choice.
And now you want to learn how to put grip tape on your skateboard? Yeah, you're in the right place.
Listen. People outside of skateboarding don't know that gripping your skateboard is an art.
Every skater has their own way of making their skateboard setup, unique.
And it's super empowering once you learn how to do it.
With that said, today you’re going to learn how to grip your skateboard, like a PRO.
You can use this guide if you're removing your old grip tape and replacing it with a new sheet. Just make sure your deck is in good shape.
This also works when putting grip tape on longboards. Or when using different types of grip tape like clear grip tape or grip tape with designs.
You may feel a little odd jumping into this today. No worries, you got this! (Bonus points for adults: your kids will think you're super rad.)
Let's get your new skateboard ready to use.
Remove any plastic wrapping, stickers, or packaging that came on your skateboard deck.
You want it to be clean and gunk-free.
Remember this, you can't put grip tape over grip tape.
Grab your sheet of skateboard grip tape and peel off the backing paper to expose the sticky adhesive.
Save the backing paper; you'll need it later.
Hold the grip tape longways and hover over the top of your new deck. Make sure it's centered.
Stick the grip tape to the nose of the board, then to the tail.
This will allow you to see if you're centered or need to readjust it.
If you love how it looks, then you're ready for the most critical step.
Grab your backing paper and lay it over the top of your grip.
Begin by pressing down in the center of the board and rub your hands outward.
Do this until your grip is 100% applied to the top of your skateboard.
It's time to file your grip. Take the flat file and rub it around the edge of your skateboard.
It'll leave a white guideline to make for easy cutting.
The more you file it, the easier it'll cut. Don't get carried away, you can file through the grip. So use caution.
Take your retractable blade knife (or razor blade) and poke it through the bottom of your grip tape.
Place it along the edge of your skateboard at a 45° angle.
You can cut the grip in sections or one full piece, whichever is more comfortable for you.
Follow the edge of the board with your knife until your board is all the way cut out.
Take the excess grip and rub the grip around the edge of your skateboard.
You want to make sure your grip is 100% applied to your board. This will keep it from peeling up later.
Now look over your fresh gripped skateboard for any air bubbles and pop them.
Put your board on the ground and step on it. The pressure can find and release air pockets your eyes can't see.
Now, take the pointed tip screwdriver and poke the holes for your truck hardware.
Always do this from the top of your skateboard, down.
Pick up any garbage you created along the way.
Recycle anything you can. Everything else... throw it in the trash.
Now put your skateboard together. Add some cool skateboard stickers to make your board more personal. And that's how you put grip tape on a skateboard.
Now we'd like to hear what you have to say.
What’s the #1 you took away from this?
Or do you have a question about something?
Either way, please share your thoughts in the comments below.